Insert them into the holes in the deck (from the
top)
The rudder is made from these pieces.
Glue them together as shown.
Leave to dry.
We suggest you paint some of your model at this
point
–
see below for details.
Take some of the railing support posts.
Work around the edge of the deck, glueing them
into position.
Also add them to the stern.
Glue the front/side rails into place.
Then add the stern rail.
The wings for the right hand side of the model.
Note
–
when the wings are placed on top of each
other, the three lugs should form a series of steps
(see pic)
