Take the lower barricade section…
..and glue it into position (see pic).
Take the upper barricade
section…
..and attach that to the model as shown.
The rear barricade section.
Glue this into place. Leave this “front” assembly to
dry.
Rear Supports (Do this three times)
Take the pieces shown above from the sprue.
Glue the one on the left to the
back
of the one on
the right. Leave to dry.
Final Assembly
Take the six sub-assemblies you have made.
Glue the three
“
front
”
pieces to the walkway.
