Assembly instructions: Magelan Leakage Sensor
5
n
1
2
3
4
5
6
Note:
If the Main Water Protector is closed in the app, it can be opened again via app. However, if the Main Water Protector is closed by a leak, the
Main Water Protector must be reactivated manually on the app. (An opening of the protector via app is not possible after a leakage)
Leakage system
When a Leakage Sensor is registered,
this icon appears in the system
overview
Extensions for the
Leakage system
1. Siren (acoustic signal)
2. Main Water Protector (monitoring
of the main water pipe and immedi-
ate closing in case of leakage)
Activate / deactivate
Naming the Siren
Leakage detected
Bath is active and no
leakage was detected
Error message
Check cable: A cable may be defec-
tive or not correctly plugged into the
device
Save changes
All changes must always be con-
firmed
Leakage system
Washing cellar
ID: 1
Wet
Main Water Protector
Bath
ID: 8
Dry
Open
Washing machine
ID: 20
Check cable
Submit
Online
On
Online
Siren
House 1
ID: 12
6
3
1
2
4
5
System overview
Device control
Radiator
Underfloor
Boiler
Leakage
system
Security
system
PI-Sensor
Blinds
Socket
Help
PDF Manuals
system
Fan-Coil
Control via blossomic app
