KSTB2020 - Warehousing Guide
2
3
Connect the Ethernet Cable
to a Router (Optional)
Connect the Power Adapter
(100 ~ 240V AC, 50/60 Hz)
Connect the HDMI Cable to the TV HDMI Port and
Select the corresponding HDMI Source on the TV
Output to TV
Power
Input thru Wi-Fi
or Ethernet Cable
INCOMING CHURN TEST PROCESS
Connect the unit as shown below with a known, good power supply as well
as a known, good remote control. Verify that each have behavior as expected.
Repeat using Wi-Fi connectivity if necessary.
SD Analog Output Port Test
Connect the Ethernet Cable
to a Router (Optional)
Connect the Power Adapter
(100 ~ 240V AC, 50/60 Hz)
Connect the Analog Composite to the TV Ports
and Select the corresponding AV Source on the TV
Output to TV
Power
Input thru Wi-Fi
or Ethernet Cable
Video
L
Audio
HDMI Video Port Test
Connect unit as shown below with a known good power supply as well as a
known good remote control. Verify that behavior is as expected. Repeat using
Wi-Fi connectivity also.
When a unit has been returned from the field for any reason it should be tested
for functional compliance.
If either test above fails, contact Blonder Tongue customer service for further
direction.
If the unit passes all tests and behaves as expected, refer to KSTB2020 Factory
Reset instructions on the next page to refresh the unit to its factory default
configuration.
KSTB2020 - Warehousing Guide
