Blonder tongue HDE-1C-QAM, Руководство пользователя

Страница: 23 / 32

23 HDE-1C-QAM
Instruction Manual
5.9 ”Main > Refresh" Tab
The "Main > Refresh" tab can be clicked while you are on any of the following sub-tabs screens: "Status", "Video", "Audio",
"TS Config", "QAM", and "Output". When clicked, it will update all relevant fields/ parameters of the active screen as the
information is retrieved from the HDE-1C-QAM on a real time basis.
5.10 "Network" Screen
The “Network” screen (Figure 5.10) is a read and write screen where the following parameters are displayed and configured:
Ethernet MAC Address: indicates the MAC Address of the “Remote Control/Data 100/1000” Port.
Software Version: indicates the software version of the unit.
FPGA Version: indicates the current hardware version of the unit’s FPGA chipset.
QAM Version: indicates the current software version of the unit’s QAM output module.
Hardware Version: indicates the current hardware version of the unit.
Serial Number: indicates the unit’s serial number.
Headend Name: a user-defined field to make identification easier.
Location: another user-defined field to make identification easier.
Login Timeout (Minutes): indicates the period of time before the unit logs itself out if there is no activity on the web
screens. Options are 5, 15, 30, or 60 minutes. (Factory Default: "5" minutes)
Ethernet IP Address: see of Section 5.11 for details.
Ethernet Subnet Mask: see of Section 5.11 for details.
Ethernet Default Gateway: see of Section 5.11 for details.
Remember to click on the SAVE button to apply the new values/configurations.
Figure 5.10 - "Network" Screen
1
5
3
7
10
12
9
2
6
4
8
11
1
4
2
5
3
6
7
8
9
10 15
11 16
12 17