2 Clearview 4:2 SD
Quick Guide
Product Introduction
The Clearview 4:2 SD receives up to twenty-four (24) H.264 AES-128 encrypted IP channels from the Technicolor COM3000/2000
devices.
The Clearview 4:2 SD decrypts the AES-128 content into clear IP, transcodes the decrypted H.264 content into MPEG-2,
while preserving the “forensic watermarking” and returns the content to the Technicolor COM3000/2000 devices as clear IP.
Before You Begin
Unpacking the Unit
You will find the following Items in the box:
•
Clearview 4:2 SD (QTY=1)
•
Power Cord with IEC C13 line socket and 3-pin Type B NEMA 5 plug (QTY=1)
The Clearview 4:2 SD is designed to be installed in a standard 19-inch (483 mm) rack (EIA 310-D, IEC 60297, and DIN 41494
SC48D).
To install, secure the unit's front panel to the rack by inserting four (4) machine screws, with cup washers, through the
four (4) mounting holes in the front panel. A 1RU open space is recommended above the unit for ventilation.
Step 1: Setup and Install of the Unit
1
To power the unit up, connect the IEC line cord to the receptacle on the rear panel. Then connect the other end to a
120 VAC power outlet. The input power receptacle is equipped with a fuse-holder and fuse (SLO-BLO, 3.0 Amp, 250V).
2
WARNING
For safe and reliable operation, the ground pin of the power cord must be grounded properly.
IMPORTANT NOTE BEFORE YOU BEGIN!
The Key2License from Technicolor is required and MUST be installed on the COM3000/2000 unit prior
to setup of this unit. See
Section 3
of the User Manual for more information.
DO NOT BLOCK THE UNIT'S AIR INTAKE OR AIR DISCHARGE OPENINGS
The Unit performance will be degrated without proper ventilation.
Excessive heat will shorten the life of the unit.
Features:
•
Decrypts Technicolor’s AES-128 encrypted H.264 video
content.
•
Unicast IP input that supports up to 24 SPTS H.264 HD
programs
•
Unicast IP output supports up to 24 SPTS MPEG-2 SD
programs
•
Preserves Technicolor’s embedded watermarking on
outbound MPEG-2 video content
•
Compatible with Technicolor’s COM3000 DirecTV receivers
•
Easy-to-use GUI for monitoring & control
•
24 front panel Status LEDs (one for each program stream)
and 1 front panel Temperature LED
