Blonder tongue 6734, Руководство пользователя

Страница: 9 / 16

9 NXG-SDI4 Module
User Manual
Section 4 – Configuring the Encoders
4.1 “Encode: Status” Screen
The “ Encode: Status ” Tab (Figure 4.1) is a “read-only” screen which indicates the status of each encoder. A visual status of
the pipeline is also shown on the left side. When hovering over an encode block, the corresponding status table, to the
right, highlights.
Figure 4.1 - “Encode: Status” Screen
Encoder Status States
Light Gray (Red Question Mark): The encoder has not been detected yet.
Light Gray : The encoder is disabled.
Dark Gray (Orange Arrow): The encoder is idle or starting up.
Green: The encoder is active.
Red: The encoder has failed.
SDI Status States
Black: The SDI has no connection.
Green : The SDI is connected and sending a signal.
Red:
The SDI is connected and has an error.