38 / EN
Washing Machine /User’s Manual
Troubleshooting
Problem
Reason
Solution
Foam is overflowing from
the detergent drawer.
Too much detergent is used.
Mix 1 tablespoonful softener and ½
l water and pour into the main wash
compartment of the detergent drawer.
Put detergent into the machine suitable
for the programmes and maximum
loads indicated in the “Programme and
consumption table”. When you use
additional chemicals (stain removers,
bleachs and etc), reduce the amount of
detergent.
Laundry remains
wet at the end of the
programme. (*)
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent
usage.
Use recommended amount of detergent.
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum
to prevent any damage to the machine and to its surrounding environment. Laundry should be
rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 6.2
A
CAUTION:
If you cannot eliminate the problem although you follow the instructions in this section, consult your
dealer or the Authorised Service Agent. Never try to repair a nonfunctional product yourself.