20 / English
Front-Loading Automatic Washer
Installation Instructions
Power supply and circuit
Connect the clothes washer to the junction box supplied. Junction
box must be connected to an earthed outlet protected by a fuse of
suitable capacity.
Important:
• Wall power connection should comply with national regulations.
• The voltage and maximum total current are specified in the section
“Specifications”.
• The appliance must not be directly connected to the wall power in
case of absence of junction box.
• Connection via extension cords or multi-plugs should not be made.
B
WARNING
• A damaged power cable must be replaced by a qualified
electrician.
• The appliance must not be operated unless it is repaired! There
is the risk of electric shock!
15 Amp. Fuse or circuit breaker, 208-240 volt, 60 Hz, grounded,
alternating current
Properly grounded 3-prong receptacle and junction box to be located
so the power supply cords are accessible when the washer is in
installed position.