background image

16    

EN

cycle. Washing results are adversely 

affected by an overloaded drum. 

Overloading may also cause wrinkling

 

and abrasion on clothes. 

Make sure power button is off before 

loading the washer. To load the 

washer,

•  Pull the door handle.

•  Place laundry items loosely in the 

drum.

•  Mix small and large items for an even 

load distribution. Large items should 

be loaded first. Large items should 

not be more than half of the total 

wash load. 

•  If you put a wash bag or net which 

is filled with small items in the drum, 

put an additional wash bag to 

prevent load unbalance. Both wash 

bags should have the same amount 

of items to provide an even load 

distribution.

•  Before washing a single or a few 

items such as a pillow, a teddy bear, 

a single or a pair of shirts, sweat 

shirts etc, put some additional items 

in the drum for better load distribution 

and spinning. 

•  Make sure that there is no clothing 

obstructing the door or caught 

between the door and rubber seal.

•  Push the loading door firmly shut until 

you hear it lock into space (especially 

if you load the washer with full load or 

big items).

•  In case the door is not locked,  

“door” expression will appeare on the 

screen. In that case, door should be 

opened and closed again firmly.

•  If the door is not closed completely, 

the machine will not start. This is a 

safety precaution. The front door 

is locked until end of the washing 

program and it can not be opened 

untill the door icon on LCD is off 

following the end of the program.

•  Unload the washed items just after 

the program cycle has finished. Delay 

of unloading may cause wrinkling and 

unwanted odor on laundry. 

•  Check to see any small metal items 

such as pins, coins etc left in rubber 

seal while unloading the washer. 

before or after washing to prevent 

dye transfer.

C

 Wash heavily and lightly soiled items 

separately. 

C

 Lint producers (towels, linen etc) and 

lint collectors (easy care, permanent 

press) should be washed separately. 

Lint producers should be washed 

inside-out.

Preparing the laundry

•  Items of laundry with metal parts (e.g. 

underwire bras, belt buckles, metal 

buttons) will damage the washer. 

Remove metal parts of place the 

items in a cloth bag, pillow case, or 

something similar.

•  Remove any non-washable items 

and accessories from laundry before 

washing.

•  Empty pockets, remove all foreign 

objects (e.g. coins, pens, paper 

clips). If possible: Turn pockets inside 

out and brush.

•  Place small items of laundry (e.g. 

tights) in a cloth bag, pillow case or 

something similar. This can also help 

you to avoid searching for lost socks.

•  Handle curtains special care. Remove 

non-stainless curtain runners and 

lead tape. Place runners that can’t be 

removed in a cloth bag, pillow case 

or something similar.

•  Heavy stains should be pretreated 

with soapy water appropriately before 

washing (Do not rub or scratch the 

stained area). If in doubt, check with 

a chemist or dry-cleaner.

•  Use only dyes/discoloring and anti-

scaling agents suitable for machine 

wash. Make sure to follow the 

instructions on the package.

A

 WARNING - Wash jeans, delicates, 

pants and sweat-shirts inside-out.

Loading the washer

Maximum load capacity depends on the 

fabric type of laundry, soiling amount of 

laundry and program cycle you wish to 

use.

C

 Do not exceed the maximum load 

capacity of the selected program 

Содержание WM 87120 NBL00













































Отзывы: