Blomberg TKF 1230, Руководство по эксплуатации

Страница: 13 / 16

ON A GLANCE
Preparation and start
1.
Put laundry into the drum, close the door.
2.
Switch on the appliance by using the
On/Off Button.
3. Set the program selector
4. If wanted, use the time delay
5. Press >Start< button.
Changing the program
To change to another program, the running
program has to be stopped. The Start
button has to pressed for 2 seconds to
cancel the program.
Aborting a program
Do not turn off the appliance during the
heating phase (Indicator “Drying”
flashes). Risk of heat accumulation!
1.
First stop the running program (press
the > Start< for 2 seconds.)
2.
Select the program >Fluff/Refresh<
3.
Press the >Start< button.
4.
Wait till the end of the program.
Adding more laundry
This is only reasonable at the beginning
of a program; otherwise you will have
a mix of half-dried and too strongly
dried clothes.
1.
Press the >Pause< button.
2.
Put the laundry into the drum, close the
filling door.
3. Press the >Start< button.
Laundry final drying
1. Adjust the program selector to one of the
timed programs 60 min<, >40 min< or
>10 min<.
2. Press the >Start< button.
Program end
The program has ended when the indicators
>Stop/ < and >Clean fluff filter < flash.
During the anti-crease (at function “Anti-
crease”) the indicator “Stop” will flash.
Now you can end the program at any
time.
1.
Open the door, take out the laundry,
check the drum for foreign matters.
2.
Adjust program selector to >Stop<.
3.
After every drying:
- Clean the fluff filter (see “Fluff filter”).
4. After 20 times drying or once a month:
Clean the air cooler (see “air cooler”)
5. After 50 times drying or 4 times a year:
- Clean the drum rips (see “Drum rips”).
6. According to need:
- Clean the case and display; use a soft
cloth and mild cleaning fluid; dry with
a soft cloth.
Do not use any scrubbing sponge or
scrubbing agent! These will damage
plastic parts and varnish.