![background image](http://html1.mh-extra.com/html/blomberg/knd4554vi/knd4554vi_operating-instructions-manual_2774013008.webp)
EN
6
Energy Saving Tips
1.
Ensure your appliance is installed in
a well ventilated area.
2.
Ensure the time between buying
chilled/frozen food and placing them
in your appliance is kept at
minimum, particularly in summer. We
recommend you use a cool bag or a
special carrier bag to carry frozen
food.
3.
Do not leave the door (s) of your
appliance open longer than
necessary and ensure they are
closed properly after each opening.
4.
Defrost frozen food in the fridge, so
that frozen food acts as an ice pack
to assist cooling in fridge.
Compliance with WEEE
Directive and Disposing of
the Waste Product:
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification symbol
for waste electrical and
electronic equipment
(WEEE).
This product has
been manufactured with
high quality parts and
materials which can be reused and are
suitable for recycling. Do not dispose
of the waste product with normal
domestic and other wastes at the end
of its service life. Take it to the
collection center for the recycling of
electrical and electronic equipment.
Please consult your local authorities to
learn about these collection centers.
Compliance with RoHS
Directive:
The
product
you
have purchased
complies with EU RoHS Directive
(2011/65/EU).
It does not contain
harmful and prohibited materials
specified in the Directive.
Package information
Packaging materials of the product are
manufactured from recyclable materials
in accordance with our National
Environment Regulations. Do not
dispose of the packaging materials
together with the domestic or other
wastes. Take them to the packaging
material collection points designated by
the local authorities.
TRANSPORTATION
INSTRUCTIONS
1.
The appliance should be transported
only in a vertical upright position. The
packing as supplied must be intact
during transportation.
2. If transported horizontally, leave to
stand upright for at least
4
hours before
switching on, to allow compressor oil to
settle.
3.
Failure to comply with the
above
instructions could result in
damage
occur
r
ing to the appliance.
The
manufacturer will not be held
responsible if these instructions are
disregarded.
4.
The appliance must be protected
against rain, moisture and other
atmospheric influences.
5.
When positioning your appliance
take
care not to damage your flooring,
pipes,
wall coverings etc. Do not move
the
appliance by pulling by the door or
handle.
6.
Empty any water in the drain
tray before moving. See section
‘Defrosting’ and
"
Maintenance and
cleaning
"
for
further information.
7.
Make sure that the defrost water
pipe
at the back of the product is fixed
to the
plastic evaporating pan on the
top of
the compressor, to avoid defrost
water
spillage on the floor.