Blomberg GSN 1220 Скачать руководство пользователя страница 14

13

Upper basket with variable height setting (depending

on the model)

The upper basket is equipped with a lifting mechanism

which enables you to change the height of the basket

even if it is fully loaded, and without having to remove it

from the dishwasher.

The height of the upper basket was set at the factory to

the lowest position.  To lift the upper basket to the “high”

(    ) position, hold it on one side and carefully pull it

upwards.  To lift the opposite side of the basket, hold it

and pull it upwards in the same manner (    ).

To lower the upper basket, hold the basket lever on one

side and carefully lower the basket without releasing the

lever. (    ). Repeat the procedure with the lever on the

opposite side of the basket. Make sure that both levers

catch in the same height position.

Height setting with empty basket

In this model, the height setting of the upper basket may

be changed using the wheels which are present at two

height levels.

Release the latches on both the right and left tracks of

the upper basket by turning them to the outside (    ).

Pull out the basket completely (    ).

Place the basket into the tracks again at the desired

height (     ).

Push the latches back into the correct position.

14

C

A

B

B

E

D

C

D

E

A

B

A

Rack (depends on the model)

Depending on the size of the glasses and cups, the rack

height setting may be adjusted (             ).

Cleaning your machine at regular intervals ensures longer

product life and reduces the risk of reccurring problems.

Warning

Always unplug the machine and turn off the water

supply before cleaning.

Use a gentle household cleaner for the outside and

the door seals.

Clean the control panel only with a moist cloth and

clear water.

Cleaning the filters

Clean the filters and the spray arms regularly. A dirty

machine will have a negative effect on the cleaning results.

Main filter

Coarse filter

Micro filter

1. Remove the lower basket from the machine.

2. Turn the coarse filter to the right and pull it out in an

upward direction (    ).

3. Pull out the main filter (    ).

4. Press on the two tongues of the coarse filter and

remove the micro filter (    ).

5. Clean the filters thoroughly under running water. Use

a brush if necessary.

6. Replace main filter

7. Replace the micro filter and the coarse filter into the

main filter. Twist it clockwise until it clicks in.

Warning

Do not operate your dishwasher without a filter.

Ensure that your filters are correctly installed

Clean the filters regularly.

How to clean your dishwasher

7

C D E

1

2
3

A

B

C

1

A

B

C

2

3

E

D

C

Содержание GSN 1220















Отзывы: