Blomberg DWT 37200 NBL00, Инструкция по использованию и уходу, Страница: 14 / 32

12
USA
7
8 3
2 4 5 6
1
Rinse & Hold Quick Wash China/Crystal Regular Wash Pots & Pans Pots & Pans Plus
+
Auto
6. OPERATING THE DISHWASHER
1
On/Off button
2
Rinse aid level indicator light *
3
Salt level indicator light *
4
Display
5
Time Delay button *
6
Start/Pause button
7
Cycle Select button
8 Half Load button
(* Depending on model)
HOW TO USE YOUR DISHWASHER:
1. Open the door and load the dishwasher.
2. Check that both upper and lower spray
arms move freely.
3. Fill enough detergent into the detergent
dispenser and close the lid.
4. Push in the On/Off button
1 and check that
the display lights come on.
5. Check the rinse aid level indicator light.
2
If necessary, re fi ll rinse aid. (depending on
model)
6. Check the salt level indicator light.
3 If
necessary, re fi ll salt. (depending on model)
7. Use the Cycle Select button 7 to choose
your washing program.
8. Use the programme selection button
8 to
choose your washing programme.
- When there are few dishes, additionally use
the Half load button.
9. Start the program with the Start/Pause
button.
6
10. Close the door and the program will start.
11. When the wash program has ended, an
electronic beep will sound and will continue
every 10 seconds. After 5 minutes of elapsed
time the sound will stop. The beep can also be
stopped by opening the door or by pressing
the On/Off button.
1
12. Press the On/Off button 1 and open the
door after the program is completed. The
indicator lights will go off.
13. Allow your dishes to cool for 20 minutes,
with the door open.
14. Unload the dishes. Begin with the lower
rack.
CAUTION
Avoid opening the door during the washing
process. This interrupts the washing
process, and hot steam will escape. Hot
steam can cause burns and other serious
injuries. When the door is closed, the
program will continue.
FUNCTION BUTTONS
ON/OFF BUTTON
Turn the dishwasher on with the
On/Off button. When turning on,
the icon on the display module of
the last used program will light up.
START/PAUSE BUTTON
Use this button to start the selected
program. When the button is
pressed once, the light on the
button will turn on.
Stop the program with the Start/Pause button.
HALF/LOAD (1/2) BUTTON
When there are few dishes, you
press this button after pressing the
programme selection button. When
turning the dishwasher on, the indicator light
on the button lights up. This function helps you
to save water and energy.
DISPLAY
Select delay time with Time Delay
button (depending on model) and
water hardness level in the service
mode are displayed.