22 - EN
Sensor
There are humidity sensors in your machine
that detect whether the laundry is dry or not.
For sensor cleaning;
1. Open loading door.
2. Allow machine to cool off if drying has been
done recently.
3. Wipe the metal sensors with a soft cloth
dampened with vinegar and dry the sensors
afterwards.
C
Clean the metal sensors at regular
INTERVALS TIMES A YEAR
A
Never use solvents, cleaning agents
or similar substances when cleaning
as these might cause fire and/or an
EXPLOSION
Lint filter
Lint and fibers released from the laundry in to
the air during the drying cycle are collected in
THE m,INT &ILTERn
C
F
ibres and lint are formed during wearing
and washing.
A
Always clean the filter after each drying
cycle.
To clean the Filter;
1. Open loading door.
2EMOVE THE LINT FILTER BY PULLING IT UP AND
open the filter.
3. Clean lint, fiber, and by hand or with a soft
piece of cloth.
4. Close the filter and put it back in place.
C
9OU CAN CLEAN THE FILTER AND FILTER AREA WITH
a vacuum cleaner.
C
Clogging may arise on the filter surface
after using your machine for some time; if
this occurs, wash the filter with water and
dry it before using again.
6
Maintenance and cleaning