EN
9
Replacing the interior light
bulb
Should the light fail to work switch
off at the socket outlet and pull out
the mains plug. Follow the below
instructions to check if the light bulb
has worked itself loose.
If the light still fails to work obtain a
replacement E14 screw cap type
15 Watt (Max) bulb from your local
electrical store and then fit it as
follows:
A
Before disposing of your
refrigerator, cut out the electric plug
and, if there are any locks on the door,
make them inoperable in order to
protect children against any danger.
Adjusting the legs
If your refrigerator is unbalanced;
You can balance your refrigerator by
turning the front legs of it as illustrated
in the figure. The corner where the
leg exists is lowered when you turn
in the direction of black arrow and
raised when you turn in the opposite
direction. Taking help from someone
to slightly lift the refrigerator will
facilitate this process.
1.
Switch off at the socket outlet and
pull out the mains plug. You may find
it useful to remove shelves for easy
access.
2.
Remove the light diffuser cover as
shown in figure (a-b).
3.
Replace the burnt-out light bulb.
4.
Reassemble the light diffuser cover
as shown in figure (c).
“Push firmly to ensure cover is fitted
properly.”
5.
Carefully dispose of the burnt-out
light bulb immediately.
“Replacement light bulb can easily be
obtained from a good local electrical or
DIY store.”
Содержание DSM 1510 A+
Страница 2: ......
Страница 88: ...48 1070 0012 1 2 en de fr nl da ...