27
GB
Before removing the bulbs
from the housing, be sure to
first turn off the electrical supply
to the appliance.
Turn off the oven and/or acti-
vate the cut-out or unplug the
power lead.
C
hanging the bulbs
You need to obtain bulbs able to withstand a temperature
of 300°C, 25 watts, 230 - 240 volts, E14, which can be
purchased from shops specialising in electrical items.
1.
Turn the cover of the lamp to the left.
2.
Turn and unscrew the incandescent lamp in an anti-
clockwise direction.
3.
Replace the incandescent lamp.
4.
Reinsert the cover, screwing it in a clockwise direction.
Caution! Do not damage the seals!
W
hat to do in case of malfunctions?
WHAT SHOULD
YOU DO?
POSSIBLE
CAUSES
Your display does not light up
- Oven is not connected to
power source.
- Electronic board is not func-
tioning.
- Check that the appliance is
receiving electricity (good fuse).
- Call the After-Sales Service
Department.
Water or steam comes out of
the appliance.
- The door is not properly
closed.
- The door seal has come away
from its support.
- The door seal is faulty.
- Close the door properly.
- Correctly insert the seal into its
support.
- Call the After Sales Service
Department.
The light on the oven cavity
does not work.
The light is faulty.
Replace the light.
YOU OBSERVE
THAT…
In all circumstances, if your efforts are not sufficient,
contact the After-Sales Service Department without delay.
Ensure that both seals are in the right place.
Caution!
The seals must be in perfect condition. In the event that the seals
are damaged, please contact the After Sales Service Department.
99635821_ML_B.qxd 08/03/2005 14:11 Page 27