Blofield DoNuts Solids, Инструкция по эксплуатации

Страница: 2 / 6

1.Take the cover out of the box
and place it on a clean surface,
with the holes for the valves
upwards.
2.The inflation valve is on the
right side. Make sure the pin
is in the closed/up position.
If this is not the case turn the
pin clockwise. The valve on
the left is a safety valve to
control overpressure.
3. Inflate the Tube with the
inflation side of the pump.
Screw the nozzle clockwise
to lock the hose in the valve.
Make sure the cover is always
spread evenly over the inner
tube. (When the cover needs
to be positioned on the tube,
see manual chapter 3. Cover
Assembly)
4. Inflate the tube until all the
wrinkles have disappeared.
This takes approximately 2
minutes. You can’t overinflate
the Donuts because of the
safety valve.
5. Turn the tube upside down. 6. Now place the table on the
tube. It is best to do this with
2 persons.(When the metal
axles are not inserted, see
manual chapter Axles inser -
tion)
7. Fasten the table by com -
pressing the pins and position -
ing the stainless steel U-sec-
tions over them.
8. Make sure the pins click into
the holes on both sides, and
are fully extracted.
1. Donuts Build-up