Blodgett Mark V Скачать руководство пользователя

Страница: 33 / 40

Operation

Intelliplus with Chain Event Control

COOK OPERATION

1. Rotate the TEMPERATURE dial (5) to the de-

sired cooking temperature from 150-500

(66-260

C). Turn the dial clockwise to in-

crease the temperature, counter-clockwise to

decrease.

2. Press the COOK HI/LO FAN key (8) until the

display (3) reads

HIFAN

. Press the key again

to select the low speed fan. The display reads

LOFAN.

3. Press the FAN CON/CYC key (11) until the dis-

play reads

FAN CON

. Press the key again for

cycling fan operation. The display reads

FAN

CYC

. The fan cycles on and off in 30 second

intervals at the speed selected with the COOK

HI/LO FAN (8) key.

4. Rotate the TIME (4) dial to the desired cook

time from 5 seconds to 12 hours. Turn the dial

clockwise to increase the cook time, counter-

clockwise to decrease. When the time digits

and the colon blink in the display, the cook

cycle has been set but not started.

5. When the display reads the set temperature

press the START TIMER key (6) to start the

cook cycle. The time can be changed at any

time during a timing cycle by rotating the TIME

dial (4) clockwise or counter-clockwise. To

cancel the countdown press the CANCEL key

(14).

NOTE: To display the temperature within the

oven, press and hold the ACTUAL

TEMP key (7).

6. When the timer has counted down to 0, press

the CANCEL key (14) to silence the alarm.

MANUAL COOK AND HOLD OPERATION

1. Rotate the TEMPERATURE dial (5) to the de-

sired cook temperature from 150-500

(66-260

C). Turn the dial clockwise to in-

crease the temperature, counter-clockwise to

decrease.

2. Press the COOK HI/LO FAN key (8). The dis-

play reads

HIFAN

. Press the key again to se-

lect the low fan speed. The display reads

LO-

FAN

3. Rotate the TIME dial (4) to the desired cook

time. Turn the dial clockwise to increase the

time, counter-clockwise to decrease.

4. Press the HOLD key (9). The display reads

HOLD.

Rotate the TEMPERATURE dial (5) to

set the desired hold temperature.

5. Press the FAN CON/CYC key (11) to set the

fan mode. If cycling fan is selected the CYC

key remains lit.

NOTE: When FAN/CYC is selected in the hold

mode the fan cycles on and off with the

heating elements.

6. When the oven reaches the set temperature,

press the START TIMER key (6) to start the

cook cycle. The display flashes the fan speed

then counts down the cook time. The hold key

blinks until the cook time expires.

7. As the oven enters the hold mode the hold key

remains lit. The timer begins counting up to in-

dicate elapsed time. If cycling fan is selected

the fan cycles on and off at low speed.

NOTE: If the desired hold temperature is low-

er than the actual oven temperature,

the fan shuts off. The temperature dig-

its blink until the oven temperature

drops to the desired hold tempera-

ture.

8. To display the temperature within the oven,

press and hold the ACTUAL TEMP key (7).

NOTE: Press the CANCEL key (14) at any time to

cancel the current cycle.

WARNING!!
A complete five minute shutdown must be

observed before the oven is relighted.

Содержание Mark V









































Результаты поиска

Содержание Mark V

Отзывы:

Похожие инструкции для Mark V

Бренды по названию

Популярные бренды

Blodgett Mark V, Руководство по установке

Результаты поиска

Содержание Mark V

Отзывы:

Похожие инструкции для Mark V

Бренды по названию

Популярные бренды