OM-KTT-DS 7
Initial Start-Up
Now that the kettle has been installed, you should test it to ensure that it is operating
correctly.
1.
Remove all literature and packing materials from inside and outside of the unit.
2.
Pour a small amount of water into the kettle.
3.
Open the steam inlet valve.
4.
When the water begins to boil, inspect all of the fittings to ensure that there are
no leaks.
5.
Check the safety valve by lifting its lever far enough to let steam escape. Then
let it snap back into place to reset the valve so that it will not leak.
6.
Shut down the unit by closing the steam inlet valve.
7.
Operate the tilting mechanism to confirm that this feature functions through the
whole range of normal operation.
If the unit functions as described above, it is ready for use. If the unit does not function
as intended, contact your local Certified Service Agency.
IMPORTANT
BE SURE ALL OPERATORS READ,
UNDERSTAND AND FOLLOW THE
OPERATING INSTRUCTIONS, CAUTIONS,
AND SAFETY INSTRUCTIONS CONTAINED
IN THIS MANUAL.
WARNING
AVOID ANY EXPOSURE TO ESCAPING STEAM,
WHICH CAN CAUSE SEVERE BURNS.
