Blodgett 100E-KLS Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 24

Blodgett 100E-KLS Скачать руководство пользователя страница 11

OM-KLS-E

9

Operation

e.

When removing baskets with cooked product, lift straight up,

ensuring basket bottoms clear the kettle rim. Wear protective

oven mitts and protective apron.

f.

Allow hot water to fully drain from product, before moving the

basket away from the kettle. Do not rest baskets on the kettle rim

or pouring lip. If the baskets are too heavy for one individual to lift

and safely move, get help from another person. Remove product

immediately from the basket into another container, being sure to

avoid contact with hot product and hot basket or. . .

g.

Place baskets with food on stable, flat surface, inside a solid

steamer or bake pan, to catch any remaining hot water which

might drain from product.

B.

To Turn Off the Kettle

1.

Turn the thermostat dial to “OFF”

2.

Before the unit is serviced, or if it will be off for a week or more:

a.

Set the thermostat to “OFF”

b.

Turn off electric power to the unit at the circuit breaker or fuse.

«
...
9
10
11
12
13
...
»

Содержание 100E-KLS

























Отзывы:

Нет отзывов