Blocklychain 102-MD, Руководство пользователя

Страница: 9 / 18

9
Device modes
Scanning
Movement Detected
Motion Detector is on and scaning the area.
Motion Detecter is detected a motion.
Note:
after 5 seconds, the Movement Detected
modes change to the Scaning mode.
Update device
Reset Factory
1.
Connect the device to a charger.
2.
Click two times on the button on your de-
vice.
3.
Go to BKC Control Panel.
4.
Go to
Devices
page.
5.
On the device card, click on the device
dashboard button.
6.
Go to the
Config
tab.
7.
Click on
Update Now
.
Click and release the button, then press and
hold it for 10 seconds.
5
On your Motion Detector