Blockaudio LINE BLOCK, Руководство пользователя

Страница: 9 / 21

9
BLOCK REMOTE
Functions
UP/DOWN: Press these buttons to adjust the volume level. Use also to move the cursor, or to change values in
the Settings.
LEFT/RIGHT: Press these buttons to select the desired input. Use also to move the cursor, or to change values
in the Settings.
SELECT: This button can be used to put the Line Block, or system into and out of the Standby mode. Use also to
select/enter menu item in the Settings.
MENU: Press this button to display and escape the Setup Menu.
PLAY/PAUSE: This button allows you to mute and unmute the audio signal.
Pairing / Unpairing
Open Setup Menu, choose SETTINGS > ADVANCED > PAIR REMOTE: Instructions for the Pair / Unpair of the
Block Remote with the Line Block will be displayed.
Battery Replacement
• Find the battery component on the back of your Remote.
• Use a coin to turn the battery door counterclockwise until the door opens.
• Remove the old battery.
• With the positive side facing up toward you, put in the new CR2032 or BR2032 lithium 3V coin battery
(available at most electronic and drug stores).