Block EMOTION, Руководство пользователя

Страница: 37 / 56

37
Before operating
Before you can use your Internet radio, the streaming functionality or the operation via smart phone app, you need:
1. A fast internet connection.
2. A router, preferably with WLAN (wireless access point).
3. If your wireless network is protected with Wired Equivalent Privacy (WEP) or with Wi-Fi Protected Access
(WPA), you will need a WEP or a WPA code, so that your Internet radio can be connected to the router.
4. Before proceeding, make sure that your wireless network is turned on and has a broadband internet
access.
5. In case of problems while connecting your device to the router, please try to solve them using the manual
instructions of the router.
Setting up the device
1. Place the device on a firm surface and remove all protective films.
2. Connect the connection cable of the enclosed power supply unit to the device
and plug it into a socket.
3. Align the attached telescopic antenna.
Insert battery
A separate rechargeable battery for eMotion is available at our specialist retailers and on our website www.
audioblock.com. Only use the original battery! On the back you’ll find a cover. Press down the two straps to
open the cover and take it away from the device. There is a connector on the port and on the eMotion battery.
Take your eMotion battery and connect it by using the connectors. Place the battery into the port and close it
with the cover. Fully charge the battery. The charging level will be shown on the display.
Only use the original power supply.
If you have not used the battery for a longer time (12 months) fully charge it once.