Block CVR 100, Инструкция по эксплуатации

Страница: 48 / 64

47
Chapter 6
Connecting to a network
› You will need a network connection for „I nternet radio
“
or „M usic player
“
operation modes
.
› You will need either a router and RJ45 cable or a W-LAN router together with the required pass
-
word to establish a connection to your network
.
› Your router must have a broadband internet connection for internet radio operation and to
perform software updates
.
› When you select and „I nternet radio
“
or „M usic player
“
mode
,
your device will try to connect to
a network
.
If this is the frst time that a connection has been made or stored networks are not
accessible
,
then the „Network Wizard
”
will start
.
To start the „Network Wizard
”
manually
,
select
the following
:
MENU › System settings › Network › Network Wizard
Once started you can enter the following information
:
› W-LAN region
(
select a country
/
select a region from the list
)
› Network name (select the desired network)
› An encrypted wireless network will require a password
.
› Use the navigation buttons or the „CONTROL
”
dial to move the cursor through the displayed
characters
.
Press either the „ENTER
”
button or the „CONTROL
”
dial to confrm the selected cha
-
racter
.
› Select „BKSP
“
to delete the last character selected
.
› Select „C ANCEL
“
t o cancel your input.
› Select „OK“ to confrm the entered code and to try to establish a connection to the selected
network
.
› The unit will return to the password entry window
,
if no connection could be made
.
› Under the menu options MENU › System settings › Network › Network Profle you will not be
able to delete desired networks
.
6
Connecting to a network