Block BB-200, Руководство пользователя

Страница: 45 / 64

45
The amplifier
The BB-200 is equipped with a high-quality AB class amplifier with an output of 2 x 14 & 1 x 40 watts to 4
ohms (RMS).
To change the sound, use the following settings:
Volume:
Use „VOL +“ and „VOL-“ buttons on the remote control or the multi-function knob on the device to change
the volume of your system overall.
Please note that for different signal sources, the volume of the BB-200 can vary with the volume setting.
This is not a defect but it is caused by different input levels of the connected signal sources.
Balance:
Use the buttons „L“ and „R“ on the remote control to change the balance between the two speakers and
move to centralise the sound in the room.
Bass:
To raise or lower the bass, press „Tone“ on the remote control until „Bass“ appears on the display. Use the
„VOL +“ and „VOL-“ buttons on the remote control. This function deactivates after a short time
Volume:
Press „Tone“ on the remote control so often, until „Treble“ appears in the display. Now press the „VOL +“
and „VOL-“ buttons on the remote control to increase or decrease the volume. This function deactivates
itself after a short time.
DSP-setting (Digital Sound Processing):
Press the „SUR“ button.
This key, is used to switch on various digital sound enhancements such as „Normal“, “Live”, „Jazz“, „Rock“,
„Hall“, „Classic“, „Pop“ and „Stadium“, press several times to view the different modes. Try to find out
which setting suits you best, on the „Normal“ mode this function is deactivated.
Sound Setting „VOL plus“:
With this function you can choose between two diferent sound settings „VOL plus and VOL plus2“.