30
Nm
DRILL HOLE
VACUUM
90MM
3
REPEAT STEP 1 FOR ADDITIONAL BAY, BOLT TO 2QTY 1.8 SINGLE BAR (21-0038) TIGHTEN ALL BOLT
ASSEMBLIES TO 30Nm TORQUE. ENSURE UPRIGHTS ARE PLUMB. DRILL AND SECURE UPRIGHTS, AS
SHOWN IN GUIDE.
HAMMER IN
BOLT
TIGHTEN
-DRILL 10MM HOLE, 90MM DEEP
USING PLATE AS A GUIDE.
-VACUUM OUT THE DUST.
-HAMMER SLEEVE ANCHOR INTO
THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO
SPECIFIED TORQUE
USING 13MM SPANNER.
SLEEVE ANCHOR BOLT FITTING
#MADEINBELFAST
30
Nm
x12
x16
10.0031
10.0019