DRILL HOLE
VACUUM
90MM
2
TIGHTEN ALL BOLT ASSEMBLIES TO THE SPECIFIED TORQUE . ENSURE UPRIGHTS ARE PLUMB AND
ALL SINGLE BARS ARE LEVEL. DRILL AND SECURE UPRIGHTS AND 0.7 SINGLE BAR WM AS SHOWN
IN GUIDE.
#MADEINBELFAST
10.0031
10.0019
10.0031
10.0019
x10
HAMMER IN
BOLT
TIGHTEN
SLEEVE ANCHOR BOLT FITTING
-HAMMER SLEEVE ANCHOR INTO THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO SPECIFIED TORQUE
USING 13MM SPANNER.
-DRILL 10MM HOLE, 90MM
DEEP USING PLATE AS
A GUIDE.
-VACUUM OUT THE DUST.
SLEEVE ANCHOR BOLT FITTING
30
Nm
xx
Nm
30