x4
2
#MADEINBELFAST
30
Nm
DRILL HOLE
VACUUM
HAMMER IN
BOLT
TIGHTEN
90MM
SLEEVE ANCHOR BOLT FITTING
-DRILL 10MM HOLE IN WALL, 90MM DEEP
USING PLATE AS A GUIDE.
-VACUUM OUT THE DUST.
-HAMMER SLEEVE ANCHOR INTO THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO SPECIFIED
TORQUE USING 13MM SPANNER.
BOLT 1QTY WALL BALL TARGET (21-0224) TO THE WALL USING 4QTY SLEEVE ANCHOR BOLTS
(10-0031) AND 4QTY M10 WASHERS (10-0019)
DRILL HOLES AND MOUNT USING GUIDE AS SHOWN BELOW, TIGHTEN TO SPECIFIED TORQUE.
SKU
QTY
10-0031
1
10-0019
1
30
Nm
