BLK BOX 21-0130-0E, Руководство владельца и краткое руководство по началу работы, Страница: 4 / 7

x8
x6
30
Nm
x10
DRILL HOLE VACUUM
90MM
2
TIGHTEN ALL BOLT ASSEMBLIES WITHIN THE CIRCLE TO THE SPECIFIED TORQUE . ENSURE
UPRIGHTS ARE PLUMB AND ALL SINGLE BAR ARE LEVEL. DRILL AND SECURE UPRIGHTS
AND 1.2 SINGLE BAR WM (21-0032-0B) AS SHOWN IN GUIDE.
#MADEINBELFAST
10.0031
10.0019
10.0031
10.0019
HAMMER IN
BOLT
TIGHTEN
SLEEVE ANCHOR BOLT FITTING
-HAMMER SLEEVE ANCHOR INTO THE HOLE.
-TIGHTEN SLEEVE ANCHOR TO SPECIFIED TORQUE
USING 13MM SPANNER.
-DRILL 10MM HOLE, 90MM
DEEP USING PLATE AS
A GUIDE.
-VACUUM OUT THE DUST.
SLEEVE ANCHOR BOLT FITTING
30
Nm