Blizzard ucf140, Инструкция по использованию и установке

Страница: 2 / 6

SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock or injury when using your chiller/freezer,
please note the following basic precautions:
•
Before using, read all instructions
•
Never clean appliance parts with flammable liquids. Also do not use to
store gasoline or any other flammable vapours or liquids in the vicinity of
this or any other appliance. The fumes can create a fire or explosion.
•
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified person in order to avoid hazard.
•
WARNING : Keep ventilation openings, in the appliance enclosure or in
the built in structure, clear of obstruction.
•
WARNING : Do not use mechanical devices or other means to accelerate
the defrosting process, other than those recommended by the
manufacturer.
•
WARNING : Do not damage the refrigerant circuit.
•
WARNING : Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended
by the manufacturer
•
Flammable insulation material must be disposed of by a specialized agency
INSTALLATION
•
Remove all the packing material before using your chiller/freezer
•
Clean the interior surface with a soft cloth and lukewarm water
•
Locate the chiller/freezer in a dry and airy place
•
Chillers/freezers transported in the horizontal position must be returned to
the upright position and not plugged in for 1 hour
This is essential for proper operation
•
Chiller/freezer transported in the horizontal position requires the drain
pan, located in the top of the compressor, to be checked for proper
location.
•
For proper operation, locate the chiller/freezer on a levelled counter top
•
Do not place the appliance very close to walls, this could damage the
electric cord and may block the air circulation to the appliance. Keep the
chiller/freezer a distance of at least 4 inches from the wall.
•
Do not block the air intake that ventilates the condenser unit.
ELECTRIC CONNECTION
•
Make sure there is a suitable power outlet (AC220 – 240v/50Hz, 13amps
outlet) with proper grounding to power the chiller/freezer.
•
WARNING : Do not plug other electrical appliances into the chiller/freezer
outlet. Provide an outlet specifically for the chiller/freezer. If the cord is
damaged, replace it and do not try to repair it.