Introduction
Model
FZ40
with a solid insulated door or
GFZ40
with a glass door.
Congratulations on your new freezer, we feel certain that it will
serve you well for many years ahead. To obtain maximum benefit
and efficiency from your freezer, please read the following
instructions carefully and act accordingly
INSTALLATION
1. Upon receiving the freezer, check for any damage that may
have occurred during transit. If there is, please contact your
dealer immediately
2. Place the freezer on an even flat surface and use the
adjustable feet for levelling.
3. Do not site the freezer close to heat sources such as cookers
or radiators and do not expose to strong sunlight. The glass
door freezer must never be placed in direct sunlight – Please
note that the effect of the Sun’s rays can affect goods stored
in the glass door freezer.
4. The freezer is equipped with a condenser on the rear side and
we recommend to have the condenser cleaned with a soft
brush each second month.
5. To minimize operating costs and maximise the life of the
compressor it is essential to allow good ventilation at the rear.
A clearance of 100mm is recommended
6. The cleaner has already been cleaned at the factory, but we
recommend you to clean it again using a solution of 1Tsp of
Sodium Bicarbonate to 0.5ltr of warm water.
DO NOT CLEAN
THE GLASS DOOR WITH ABRASIVE CLEANERS OR
MATERIALS!
