Blizzard FMX10, Инструкция по эксплуатации

Страница: 6 / 14

Trouble Shooting
Problems Causes Solutions
Tool shaft does not
rotate after starting the
machine
Loosen electric wiring
Check electric wiring, tighten
those loose connects
Oil leakage The seal rings are worn out Replace seal rings
Motor temperature
raised while reduced
output speed
Too low voltage Check the power supply
Overloaded Reduce load
The sped of mixing is too
high or using a wrong
stirrer
Select a suitable speed and
stirrer
The mixing knocks
with the bowl
The stirrer or bowl is
deformed
Repair or replace the stirrer
or bowl
Abnormal noise and
high temperature from
gearbox
Insufficient lubrication Add or replace the grease
Accessories canno0t
be removed from
motor
Debris (flour)stuck in the
spigot / attachment
Clean the attachment and
spigot with warm water, push
upwards and turn to
disengage fitting, pull down
to withdraw attachment
Warning!
If the equipment is out of function, please make sure that it is serviced by professional
person or please turn to special service point.