Page 14
Stiletto™ Z6 User Manual Rev. A
(c) 2015 Blizzard Lighting, LLC
Personal (Customized) Settings
1.) For manual/customized settings, navigate the control panel menu to highlight
Person
, and
press
<ENTER>
. Use the
<UP/DOWN>
buttons to highlight
Status
then press
<ENTER>
.
From here you can use the
<UP/DOWN>
buttons to turn on/off reverse pan (
Pan Rev
), or
reverse tilt (
Tilt Rev
), choose the pan rotation level of either 360° or 540° (
P-Degree
), adjust
the motor speed to fast or slow (
M Speed
), and adjust the internal mic sensitivity level from
0-99% (
Mic Sens
). When you are finished, press
<ENTER>
to confirm your changes.
Revert Custom Settings
1.) To revert customized settings back to the factory default, navigate the top level menu to
reach
Person
, and press
<ENTER>
. Then use the
<UP/DOWN>
buttons to highlight
Default,
and press the
<ENTER>
button.
2.Highlight
YES
, then press
<ENTER>
.
Auto, Stand-Alone, Sound Active Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Auto Mode
1.) Use the
<UP/DOWN>
button to scroll to
Function
, and press
<ENTER>
. Now use the
<UP/DOWN>
buttons to highlight
Auto
(Alone or Master), and press the
<ENTER>
button.
2.) You can now adjust the
motor speed
if you like by navigating the top level menu to
Person
,
and press
<ENTER>
. Then use the
<UP/DOWN>
buttons to highlight
Status,
and press the
<ENTER>
button.
3.) From here, use the
<UP/DOWN>
buttons to highlight
M Speed,
press
<ENTER>
, then use
the
<UP/DOWN>
buttons again to choose either
Speed 1
(fast), or
Speed 2
(slow).
4.) Press
<ENTER>
to confirm.
Sound Active Mode
1.) Use the
<UP/DOWN>
button to scroll to
Function
, and press
<ENTER>
. Now use the
<UP/DOWN>
buttons to highlight
Music
(Alone or Master), and press the
<ENTER>
button.
2.) You can now adjust the
mic sensitivity
if you like by navigating the top level menu to
Person
, and press
<ENTER>
. Use the
<UP/DOWN>
buttons to highlight
Status,
and press
the
<ENTER>
button.
3.) From here, use the
<UP/DOWN>
buttons to highlight
Mic Sens,
press
<ENTER>
, then
use the
<UP/DOWN>
buttons to choose a percentage level from
0%
(off), to
99%
(highest
level).
4.) Press
<ENTER>
to confirm