manualshive.com logo in svg

Blizzard Lighting RokBox, Руководство пользователя, Страница: 12 / 20

Поделиться
Скачать
Blizzard Lighting RokBox Скачать руководство пользователя страница 12

Page 12

RokBox Manual Rev. A   

 

© 2013 Blizzard Lighting, LLC

DMX Mode

Allows the unit to be controlled by any universal DMX controller. 

1.) The default mode for the fixture is DMX, which appears as 

d001

 on the LED Readout.  To 

select a different DMX address, using the 

<MENU>

 button, select 

Addr

,then hit 

<ENTER>

.  

Use the 

<UP/DOWN>

 buttons to select the correct address, then hit 

<ENTER> 

to confirm.

Setting the DMX Channel Mode: 

1.) To select a DMX channel mode, press the 

<MENU>

 button, then use the 

<UP>

 or 

<DOWN>

 buttons until the display reads 

Chnd

  and press the 

<MENU>

 button. Then use 

the 

<UP>

 or 

<DOWN>

 buttons until the display reaches your desired channel mode. Press 

the 

<MENU>

 button to confirm

.

Stand-Alone, Master/Slave, Sound Active Modes:

Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.

1.) To set the fixture in Flash/Fade mode, select  

FLAS or FAdE

. To confirm, press the 

<ENTER>

 button.

2.) Now, you can adjust the flash settings from 

FL00-FL15 

or the fade settings from 

FA00-FA15. 

Then press the 

<ENTER>

 button to confirm.

3.) To use the fixture in automatic mode, select 

ASC-

, and press the 

<ENTER>

 button. Then 

use the 

<UP/DOWN>

 to choose from 

AS00-AS15

, then press the 

<ENTER>

 button to 

confirm.

4.) Adjust the speed of the chase as above using 

SP15

 (slowest) to 

SP00 

(fastest) then 

press the 

<ENTER>

 button to confirm.  

5.) To set the fixture as a slave unit, select 

SLAU

, and hit 

<ENTER>

.  The unit will display a 

flashing 

SL.AU

  to indicate it is in slave mode.

Sound Active Mode:

1.) To use sound active mode, select 

SouA

, then press the 

<ENTER>

 button to confirm.

Standalone (Program) Mode:

Allows a single unit to display a variety of colors and programs without a DMX controller.

 

1.) To set the fixture in manual mode, select 

Pr--

.

To confirm, press the 

<ENTER>

 button.

2.) Now, select the program by using the 

<UP>

 and 

<DOWN>

 buttons to select 

Pr00-

Pr15

.  To confirm, press the 

<ENTER>

 button.

Manual Color Adjustment:

Allows the user to adjust the color balance of the fixture.  These settings are global, they will effect all 

modes.

1.) Use the 

<MENU>

 and 

<UP/DOWN>

 button to select 

rL-- 

(Red Level), 

GL-- 

(Green 

Level), 

bL-- 

(Blue Level) or 

UL-- 

(White Level), then hit 

<ENTER>

.

2.) Using the <UP/DOWN> buttons, select the maximum level for each color between 

x000-

x255

 (000=off), then hit 

<ENTER>

 to confirm.

Содержание RokBox





















Отзывы:

Нет отзывов