Blizzard Lighting Puck QFX, Руководство пользователя

Страница: 12 / 20

Page 12
The Puck™ QFX Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
1.) The default starting DMX address for the fixture is
A001
on the LED readout. To select a different starting DMX address, press
the <MEnU> button, and then use the < UP/DOWn> buttons to navigate to
Addr
, and press the <EnTER> button. Then use
the <UP/DOWn> buttons to select the starting address you wish to use, and press the <EnTER> button to confirm your choice.
2.) To select which Channel Mode you would like to use, press the <MEnU> button, and then use the < UP/DOWn> buttons
to navigate to
CHnd
and press the <EnTER> button, and then use the <UP/DOWn> to select your choice of either 3/4/9/ or
16-channel modes. Press the <EnTER> button to confirm your choice.
Stand-Alone, Master/Slave Modes:
Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.
Master/Slave Modes
- To set the fixture as the master unit or one of two separate slave settings, navigate to
SLNd
then <EnTER> . Then use the
<UP/DOWn> to buttons to navigate to either
NASt
,
SL 1
, or
SL 2
. Press the <EnTER> button to confirm your choice.
Fixtures set to Slave Mode 1 will function exactly as the master unit does, while those in Slave Mode 2 will mirror it.
Sound Active Modes
- To set the fixture to one of it’s 4 individual sound active modes, use the <UP/DOWn> buttons to navigate to
SHnd
, and press
the <EnTER> button. Then use the <UP/DOWn> buttons to navigate to
SOUN
and press <EnTER>. Finally, use the <UP/
DOWn> buttons to navigate to either
SOU1
,
SOU2
,
SOU3
, or
SOU4
. Press the <EnTER> button to confirm your choice
(See page 11, menu structure for descriptions).
Standalone (Program) Mode:
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.) To set the fixture in Auto Mode 1 (full panel effects), use the <UP/DOWn> buttons to navigate to
SHnd
, and press the
<EnTER> button. Then select
AUt1
, and press the <EnTER> button.
2.) Then to adjust the speed use the <UP/DOWn> buttons to select from
SP 1
to
SP 8
. Then press the <EnTER> button
to confirm your choice.
3.) To set the fixture in Auto Mode 2 (4-pixel effects), use the <UP/DOWn> buttons to navigate to
SHnd
, and press the
<EnTER> button. Then select
AUt2
and press the <EnTER> button.
4.) Then to adjust the speed use the <UP/DOWn> buttons to select from
SP 1
to
SP 8
. Then press the <EnTER> button
to confirm your choice.
Color Contol
- To set the fixture to one of it’s 15 built-in static colors, navigate to
SHnd
, and then
CoLo
and press the <EnTER> button.
Then to choose a color, use the <UP/DOWn> buttons to select from
Co 1
to
Co15
(see the static color table on page
14) . Press the <EnTER> button to confirm your choice.
Flash/Strobe
- To adjust the Flash Speed/Strobe , navigate to
SHnd
, and then
Stro
and press the <EnTER> button. Then to adjust the
flash speed use the <UP/DOWn> buttons to select from
0 - 255
. Press the <EnTER> button to confirm your choice.
Color Fade
- To adjust the fade settings, navigate to
SHnd
, and then
FAdE
and press the <EnTER> button. Then to adjust the fade speed
use the <UP/DOWn> buttons to select from
SP 1
to
SP 8
. Press the <EnTER> button to confirm your choice.