Blizzard Lighting PROPAR COB RGBAW Скачать руководство пользователя страница 12

Page 12

ProPar COB RGBAW Manual - Rev. B  

 

 

(c) 2019 Blizzard Lighting, LLC

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

 

Set the Starting DMX Address:

1.) Navigate the main menu until you reach 

Mode,

 press 

<ENTER>

.

2.) Use the 

<UP/DOWN>

 buttons to highlight 

Address,

 and press 

<ENTER>

.

3.) Now use the 

<UP/DOWN>

 buttons to select a channel from 

1-512

.

4.) Press the 

<ENTER>

 button to confirm.

Select the DMX Channel Mode:

1.) Navigate the main menu until you reach 

Mode,

 press 

<ENTER>

.

2.) Use the 

<UP/DOWN>

 buttons to highlight 

DMX Mode,

 press 

<ENTER>

.

3.) Now use the 

<UP/DOWN>

 buttons to highlight a channel mode.

4.) Press the 

<ENTER>

 button to confirm your selection.

Slave Mode:

1.) Navigate the main menu until you reach 

Mode

, press 

<ENTER>

.

2.) Use the 

<UP/DOWN>

 buttons to highlight 

Slave,

 press 

<ENTER>

.

Auto, Sound Active, & Manual Adjustments

Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.

Color Macros:

1.) Navigate the main menu until you reach 

Mode

, press 

<ENTER>

.

2.) Use the 

<UP/DOWN>

 buttons to highlight 

Macro,

 press 

<ENTER>

.

3.) Now use the 

<UP/DOWN>

 buttons to select a program from 

1-15

.

4.) Press the 

<ENTER>

 button to confirm your selection.

5.) To run a color macro with either color jumping or color fade, navigate the menu to 

Mode > 

Jumping

 or 

Mode > Fading

. From here, you can adjust the program speed (slow to fast), and 

add a strobe effect with adjustable 0-20Hz rate.

Auto Mode:

1.) Navigate the main menu until you reach 

Mode

, press 

<ENTER>

.

2.) Use the 

<UP/DOWN>

 buttons to highlight 

Auto,

 press 

<ENTER>

.

Sound Active Mode:

1.) Navigate the main menu until you reach 

Mode

, press 

<ENTER>

.

2.) Use the 

<UP/DOWN>

 buttons to highlight 

Sound,

 press 

<ENTER>

.

3.) Now adjust the mic sensitivity from 

0-99

, then press 

<ENTER>

.

Static Colors:

1.) Navigate the main menu until you reach 

Static,

 press 

<ENTER>

.

2.) Use the 

<UP/DOWN>

 buttons to highlight your choice, press 

<ENTER>

.

3.) Adjust the intensity level (or strobe speed) by selecting a value from 

0-255

.

4.) Press the 

<ENTER>

 button to confirm your selection.

System Settings

Adjust system settings, access system test function, and factory reset functions.

 

Display Settings:

1.) Navigate the main menu until you reach 

Settings,

 press 

<ENTER>

.

2.) Use the 

<UP/DOWN>

 buttons to highlight 

Display,

 and press 

<ENTER>

.

3.) Now use the 

<UP/DOWN>

 buttons to highlight 

On

 which keeps the menu display on 

continually, or 

Off

 which turns the menu display off after 30s of inactivity.

4.) Press the 

<ENTER>

 button to confirm your selection.

Содержание PROPAR COB RGBAW





















Отзывы: