Page 11
ProKontrol MH Manual Rev. A
© 2013 Blizzard Lighting, LLC
3.5 System Functions
3.5.1 Resetting The System
WARNING:
This will reset the controller to its factory defaults. ALL PROGRAMS AND
SETTINGS WILL BE ERASED!
1. Press and hold
<MENUS>
for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “02. Reset factory”.
3. Press
<ENTER>
to confirm.
4. Rotate the PAN wheel to select YES or NO.
5. Press
<ENTER>
to confirm or
<ESC>
to return to the main menu.
3.5.2 Delete All Fixture Patches
1. Press and hold
<MENUS>
for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “03. delete all Fixture patch”.
3. Press
<ENTER>
to confirm.
4. Rotate the PAN wheel to select YES or NO.
5. Press
<ENTER>
to confirm or
<ESC>
to return to the main menu.
3.5.3 Data Back-Up to USB Memory Stick
1. Press and hold
<MENUS>
for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “06. Data back up”.
3. Press
<ENTER>
to confirm.
4. Insert a USB memory stick to the USB port.
5. Rotate the PAN wheel to select YES or NO; press
<ENTER>
to confirm.
6.
Press a number button to store the back-up file. Up to 16 files can be
backed up, respectively stored in number 1-16 buttons. If the LED indicator
of a number button is on, it means there is back-up file in this position.
7. Press the
<ESC>
button to return to the main menu
.
3.5.4 Load Data From USB Memory Stick
1. Press and hold
<MENUS>
for 2 seconds to enter Menu Mode.
2. Rotate the PAN wheel to locate “07. data load.”
3. Press
<ENTER>
to confirm.
4. Make sure your USB memory stick is in the USB port.
5. Rotate the PAN wheel to select YES or NO; press
<ENTER>
to confirm.
6.
Press a number button to load the back-up file. Up to 16 files can be
backed up, respectively stored in number 1-16 buttons. If the LED indicator
of a number button is on, it means there is back-up file in this position.
7. Press the
<ESC>
button to return to the main menu.
3.5.5 Send Fixture Update File (RDM Fixtures Only)
Through the DMX cable, send fixture firmware code.
1. Press and hold
<MENUS>
for 2 seconds to enter Menu Mode.
2. Insert a USB memory stick to the USB port.
3.
Rotate the PAN wheel to locate “08. Send fixture Update file”.
4. Press
<ENTER>
to confirm.
5.
Rotate the PAN wheel to locate the file to send.
6. Press
<ENTER>
to start sending.
7.
Repeat Step 4 and 5 to send another file.
8. Press the
<ESC>
button to exit.
Содержание PROKONTROL MH
Страница 1: ...PROKONTROL TM MH Blizzard Lighting LLC www blizzardlighting com Waukesha WI USA Copyright c 2013...
Страница 18: ...Page 18 ProKontrol MH Manual Rev A 2013 Blizzard Lighting LLC This page intentionally left blank...
Страница 19: ...Page 19 ProKontrol MH Manual Rev A 2013 Blizzard Lighting LLC This page intentionally left blank...
Страница 20: ...Enjoy your product Our sincerest thanks for your purchase The team Blizzard Lighting...
