Page 3
LB-Hex User Manual Rev. B
© 2017 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x LB Hex™ Professional LED Fixture
• An Ever-So-Handy Power Cord
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on your purchase of one super-cool 6-in-1 LED PAR can! Now that
you’ve got your LB Hex™ (or hopefully, more!), you should carefully unpack the box
and check the contents to ensure that all parts are present and in good condition. If
anything looks as if it has been damaged in transit, notify the shipper immediately and
keep the packing material for inspection. Again, please save the carton and all packing
materials. If a fixture must be returned to the factory, it is important that the fixture be
returned in the original factory box and packing.
Powering Up!
All fixtures must be powered directly off a switched circuit and
cannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch
.
AC Voltage Switch -
Not all fixtures have a voltage select switch, so please verify that
the fixture you receive is suitable for your local power supply. See the label on the
fixture or refer to the fixture’s specifications chart for more information. A fixture’s
listed current rating is its average current draw under normal conditions. Check the
fixture or device carefully to make sure that if a voltage selection switch exists that it is
set to the correct line voltage you will use.
Warning!
Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your fixture may result if the line voltage applied
does not match the voltage indicated on the voltage selector switch. All
fixtures must be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, please just visit our website at www.blizzardlighting.
com and open a support ticket. We’ll be happy to help, honest.
Disclaimer:
The information and specifications contained in this document are subject
to change without notice. Blizzard Lighting™ assumes no responsibility or liability
for any errors or omissions that may appear in this user manual. Blizzard Lighting™
reserves the right to update the existing document or to create a new document to
correct any errors or omissions at any time. You can download the latest version of this
document from www.blizzardlighting.com.
Author:
Date:
Last Edited:
Date:
J. Thomas
1/30/2015
J. Thomas
4/18/2017
