Blizzard Lighting Kontrol 5 Скачать руководство пользователя страница 11

Страница: 11 / 20

KONTROL 5 Manual Rev A.

Page 11

read

FULL

11. Hold

<EDIT/REC>

for 3 seconds to exit programming mode. The

LED indicator above the

<EDIT/REC>

button will extinguish.

3.4.3 Deleting a Chase Step

1. Enter programming mode as described in Section 3.2.1.

2. Using the

<ChASE 1-8>

button, select the chase you wish to modify.

3. Press the

<INSERT/TAP>

button. The LED indicator will illuminate

and the current step will display on the LED display. If there are no

steps in the chase, the display will read

ST00

4. Use the

<LEFT/RIGhT>

buttons to select the step to delete.

5. Press the

<DEL/CLEAR>

button. All LEDs will blink 3 times, indicat-

ing the delete has succeeded. The steps following the deleted step

will move up one step, and the chase will be one step shorter. If the

last step is deleted, the previous step will be displayed. If there are

no steps to delete, the LED display will read

NULL

6. Repeat steps 2-5 to delete additional steps as desired.

7. Hold

<EDIT/REC>

for 3 seconds to exit programming mode. The

LED indicator above the

<EDIT/REC>

button will extinguish.

3.5 Playback

The KONTROL 5 features three different playback modes: Manual Control

Mode, Scene/Color/Scene Preset Mode, and Chase Mode. Additionally, the

user may trigger step changes in chase mode in one of three ways: Auto-

matically (Auto Chase Mode), Via audio signal detection (Music Chase Mode),

or Manually (Manual Chase Mode). We’ll look at all the options now.

3.5.1 Manual Control Mode

Allows the user to create a precise static color using KONTROL 5’s 4 control

faders.

1. Ensure that BLACKOUT mode is not selected, IE that the LED indica-

tor above the

<BLACKOUT>

button is not lit.

2. Using the

<FIXTURE SELECTOR>

button(s), select the fixtures to

be controlled.

3. Adjust the color output using

<FADER 1-5>

as desired.

3.5.2 Color/Scene Preset Mode

Allows the user to display one of up to 16 previously programmed color pre-

set.

1. Ensure that BLACKOUT mode is not selected, IE that the LED indica-

tor above the

<BLACKOUT>

button is not lit.

2. Select the desired scene page using

<SCENE PAGE A/B>

3. Select the desired scene/color preset using

<SCENE 1-8>

3.5.3 Chase Playback Mode

Allows the user to display one or more of up to 16 previously programmed

chases in sequence.

Содержание Kontrol 5


















Результаты поиска

Содержание Kontrol 5

Отзывы:

Бренды по названию

Популярные бренды

Blizzard Lighting Kontrol 5, Руководство пользователя

Результаты поиска

Содержание Kontrol 5

Отзывы:

Бренды по названию

Популярные бренды