Page 15
Colorise™ Quadra Manual Rev. A
© 2015 Blizzard Lighting, LLC
Custom Programs:
Allows users to create up to 3 customizable, 20 scene programs that are directly accessible via the control
panel and also in DMX mode.
Creating A Custom Program:
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
PROG,
and press
<ENTER>
.
2.) Now use the
<UP/DOWN>
buttons to highlight your choice of either
CHS1, CHS2,
or
CHS3
and press
<ENTER>
.
3.) Start with editing scene 1 (
SC01
), customizing it to your liking by using the choices outlined
in the table below. You can insert any of its 5 built-in auto programs (
AT01-AT05
)
, and adjust
its speed (
ATSP 0-255
), and also set the duration (in seconds) before moving on to the next
scene (
TIME 0-255
). You can also add a fade in effect to the start of this scene (
WAIT 0-255
),
and/or strobe (
SHUT 0-255
). Finally, if you want to use this scene in your program,
be sure to
enable it
(
USE: YES/NO
).
4.) Repeat the above process to create up to 20 scenes in each of the 3 customizable programs.
R (0-255) - Red Intensity
SHUT (0-255) - Strobe (slow - fast)
WAIT (0-255) - Fade In (fast - slow)
G (0-255) - Green Intensity
AUTO (AT01-AT05) - Auto Programs
USE (YES/NO) Use Scene in Program?
B (0-255) - Blue Intensity
ATSP (0-255) - Auto Speed (fast - slow)
IMPORTANT:
If USE is set to NO, or TIME is set
to 0, the scene will not run!
W (0-255) - White Intensity
TIME (0-255) - Scene Time (seconds)
Running A Custom Program:
1.) To view your newly created lighting masterpiece, use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
AUTO,
and press
<ENTER>
.
2.) Use the
<UP/DOWN>
buttons to highlight your choice of either
CHS1, CHS2,
or
CHS3
and
press
<ENTER>
. These are also directly accessible from the
Effect
Channel
in DMX mode.
Auto, Speed, and Sound Active Modes:
Set single or Master/Slaved units to run in sound active or auto mode at user selectable speeds.
Sound Active Mode:
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
AUTO
and press
<ENTER>
,
then with the
<UP/DOWN>
buttons navigate to
SOU1
(color change)
, or SOU2
(white strobe
only), and press the
<ENTER>
button.
Auto Mode:
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to navigate to
AUTO
, and press
the
<ENTER>
button.
2.) Now use the
<UP/DOWN>
buttons to highlight any program ranging from
AT01-AT05,
and press
<ENTER>
.
Auto Speed:
1.) Use the
<MENU>
and
<UP/DOWN>
buttons to navigate to
AUTO
and press
<ENTER>
,
then with the
<UP/DOWN>
buttons navigate to
ATSP
, and press the
<ENTER>
button.
2.) Make a selection from
0-255,
and press
<ENTER>
to choose a speed (slow <--> fast).
