Page 13
BladeRunner™ RGBW User Manual Rev. A
(c) Copyright 2014 Blizzard Lighting, LLC
Manual Color Adjustment
Allows
the user to adjust the color balance of each individual moving head fixture. You can set your own
intensity levels and then add PRO-Movement if you like! (See p. 12).
1.) Use the
<MENU>
button to scroll to
COLOR,
then use the
<UP/DOWN>
buttons to display
any of Red, Green, Blue, or White settings for fixtures 1, 2, 3, and 4. Push the
<ENTER>
button
while highlighting any to display the color intensity range settings from
000-255
. Use the
<UP/
DOWN>
buttons to adjust the intensity,
then push
<ENTER>
to confirm your choice.
2.) The last option in the
COLOR
submenu is
Shut
(strobe). Using the same steps as above,
you can adjust the strobe rate values from
000-255
(slow <--> fast).
Program Mode
Allows a single unit to display a variety of colors and programs without a DMX controller.
1.) Use the
<MENU>
button to scroll to
PROGRAM,
then use the
<UP/DOWN>
buttons to
display the built-in program number from
01-20
. Push the
<ENTER>
to confirm your choice. If
you wish, you can then also enable/disable PRO-Movement, or adjust the Speed Settings of the
Movement or Color Macros.
(See p. 12)
LCD Display
To turn on/off the backlit LCD display, use the
<MENU>
button to scroll to
LED,
then push
<ENTER>
.
Then use the
<UP/DOWN>
buttons to scroll or either
ON
or
OFF
, and push
<ENTER>
button to confirm your choice.
ON
will leave the display illuminated constantly, and
OFF
will turn the display off after 40 seconds of idle.
Version
This menu option simply displays the fixtures installed firmware version number.
Reset
To automatically reset the motors to automatically realign the moving head positions, use the
<MENU>
button to scroll to
RESET,
then push
<ENTER>
.
