3
102619 03/13
Operating Instruction
Index
1
Fundamental safety instruc-
tions
1.1 Designated use
The compressor system is intended exclusively
for the generation of compressed air. Any other
use shall be considered an undesignated use.
1.2 Fundamental measures
• Never point compressed air at persons.
• Observe these operating instructions.
• Keep these operating instructions available
at the location of use at all times.
• Observe the regular maintenance dead-
lines (cf. chapter 6 “Maintenance plan”).
• Use original BLITZ parts and approved
operating material only.
• Do not use compressed air for breathing
without corresponding treatment.
• Do not modify the system.
• Use mounting parts and devices
downstream from the compressor which
have been designed for the maximum ope-
rating overpressure of the compressor.
• In your capacity as proprietor, please ensu-
re that all safety regulations are observed
by the operating staff.
• Do not use the compressor as a climbing
aid.
1.3 Description of symbols and no-
tes
Danger
Mortal danger and risk of injury.
Caution
Damage to property..
Information and tips.
Index
1
Fundamental safety instructions ..... 3
1.1
Designated use
................................... 3
1.2
Fundamental measures
...................... 3
1.3
Description of symbols and notes
....... 3
2
Transport and storage ...................... 4
2.1
Transport
............................................. 4
2.2
Storage
................................................ 4
3 Mounting ............................................ 4
3.1
Mounting conditions
............................ 4
3.2
Compressed-air port
........................... 5
3.3
Electrical connection
........................... 5
4 Operation ........................................... 7
4.1
Safety instructions
............................... 7
4.2
Switching the unit on ........................... 7
4.3
Daily check-ups
................................... 7
4.4
Switching the unit off
........................... 7
4.5
Original BLITZ accessories
................. 7
5
Inspection and servicing .................. 8
5.1
Safety instructions
............................... 8
5.2
Checking and topping up the oil level
. 8
5.3
Changing the oil
.................................. 9
5.4
Draining the condensation water
......... 9
5.5
Checking and changing the
suction filter cartridge
.......................... 9
5.6
Tighten the screw connections. ........... 9
6
Maintenance schedule .................... 10
7
Trouble shooting ..............................11
Technical annex