11.
Attach #21 Nipples (2) to #4 Inlet pipe.
*Please use teflon tape to ensure proper
sealing.
12.
Install OEM Stud bolts into #4 inlet pipe
as shown.
13.
In #3 Intake manifold, use #25 manifold
cap.
* If a boost gauge is applicable, use #22 for
vacuum source.
* Please use teflon tape to ensure proper
sealing.
14
. Using
⑯
Stud bolt (5), install all 5 stud bolts
into compressor. Install studs into circles as
illustrated.
3. Intake manifold
25. Manifold cap
4. Inlet pipe
OEM
Stud bolts
4. Inlet pipe
21. Nipples
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
Online Manual Not For Resale Purposes
