For easy assembling and disassembling of the device, in the standard kit:
–
the carrier rod, the fixating ring,
the electronic control module, the
handle, the armrest and the
power supply module are
combined in a single non-
assembling component;
–
the metal bolt and nut are
mounted on the intermediate
connecting rod;
–
the lower connecting rod and the
search coil are assembled together
with the plastic bolt and nut.
Fig.2 / Metal detector BLISSTOOL LTC42 – components
The search coil could be repeatedly mounted and dismounted from the lower connecting
rod via the plastic bolt and nut. It is highly recommended that they should not be tightly
fastened, to ensure that first - the thread could not be damaged and second - the search
coil position could be easily changed during the search or when folded for carrying and
transporting.
The carrier rod is made from aluminum pipe. The fixating ring that is mounted on its lower end
is used for connecting the pipe with the intermediate connecting rod.
The electronic control module consists of a plastic box with room for the metal detector’s
electronics. The control and indication appliances lie on the front and the back panel of the
box.
The handle is part of the carrier rod and is coated with soft and solid foam.
For better stability, the armrest is made from aluminum.
The power supply module consists of a plastic box with room for the recharging 12V/2.5Ah
battery. A connector lies on the front panel of the box and is used for plugging in the battery
charger jack (the battery charger is included in the standard kit), so that the charging of the
battery could be carried out when needed.
The intermediate connecting rod is made from aluminum. At its upper end it is connected by
the fixating ring to the carrier rod – it fits into it, while at its lower end it is connected to the
lower connecting rod.
The lower connecting rod is made from wood, so that it does not interfere with the normal
working mode of the metal detector. The upper end is thinner and has an aperture to be
attached to the intermediate connecting rod via the metal bolt and nut. The lower end has a
bigger aperture, so that the search coil could be attached.
The search coil is connected to the lower connecting rod via the plastic bolt and nut. The
search coil has a connecting screened cable ending in a jack that is plugged in the connector
that lies on the back panel of the electronic control module.
BLISSTOOL LTC42 –
User Guide (version EN
200809220112)
Page 5 of 12
