background image

NOTICE

CAUTION—Use of controls or adjustments or performance of procedures other than those 

specified herein may result in hazardous radiation exposure. 

This laser product is certified as CLASS 2 laser product to the requirements of the US 

Federal Laser Product Performance Standard (FLPPS) contained in the regulations in 21 CFR 

Subchapter J. CLASS 2 laser products can be hazardous when directly viewed. 

Avoid direct viewing of a CLASS 2 laser energy. For reference the FLPPS requirements 

for demonstration laser products like laser pointers are limited to CLASS 2 levels of laser 

energy. This product uses diffractive optics to scatter the beam energy. This scattering 

effect causes the energy concentration to drop below the exposure limits for momentary or 

accidental viewing at a relatively short distance from the laser aperture. As similar with all 

bright light sources, when you operate this device in unsupervised general public areas, it is 

recommended that up close access to the BlissLights be restricted or prevented.

This laser display device incorporates a CLASS 2 laser system which, by itself, may be 

hazardous. However, this laser display device incorporates a protective housing and 

diffractive holographic optics in the machine design such that there is no exposure or 

human access to laser radiation during operation or maintenance above the CLASS 2 limits.  

Each individual laser beam power is under 1mw which is less than a standard laser pointer.

UNDER NO CIRCUMSTANCE shall attempts be made to open the protective housing or 

operate the device if the aperture windows are damaged.

All service to this laser display device requiring the protective housing to be opened and/ 

or removed shall be performed by BlissLights service personnel or their authorized agents. 

Opening the BlissLights protective housing voids the warranty. 

NO LASERS SHOULD BE POINTED INTO THE SKY WITHIN 10 NAUTICAL MILES 

OF AN AIRPORT. IF YOU ARE LOCATED WITHIN THIS SPECIFIC PERIMETER, WE 

RECOMMEND THE LASERS BE POINTED DOWN AT THE GROUND SO NO STRAY BEAMS 

ARE PROJECTED INTO THE AIR. CHECK WITH YOUR LOCAL AIRPORT OR COUNTY 

GUIDELINES FOR FURTHER INFORMATION.

1

Содержание Spright Smart










Отзывы: