THERMOFILM AUSTRALIA 27 Rosalie Street, Springvale VIC 3171
Ph: +61 (0)3 9562 3455 Fx: +61 (0)3 9548 3979 www.thermofilm.com.au
B
L
I
S
S
R A D I A N T P E R S O N A L H E A T E R S
Note: The power cord should be on the bottom side of the heater.
4.2 Surface Mounting
The THD 240 and THD 320 model heaters are suitable for wall or ceiling mounting.
The mounting bracket has 4 holes. Position the bracket in the desired location and mark the mounting
hole positions on the mounting surface. (Make sure the bracket is square and in line.)
Install the fixing devices. (Make sure the fixing devices are more than capable of safely securing the
heater.) The fixing devices should be suitable for the type of mounting surface; plaster, timber, brick
etc.
Remove mounting screws from the heater. There are 2 on the top, and 2 on the bottom.
Locate the heater in the mounting bracket. Fix heater to the bracket using the 4 screws provided.
Note: For wall mounting, the power cord should be on the bottom side of the heater.
4.3 Operation
Plug in the heater and make sure the operating light is in the ‘ON’ position. The neon switch will
illuminate.
5. Warranty
BLISS heaters have a FIVE (5) YEAR REPLACEMENT WARRANTY*.
To claim for Warranty, please retain your receipt as proof of purchase and return the faulty heater to
the place you purchased it.
Warranty does not apply to heaters which have been misused or used in conditions other than those
for which they were intended for. Nor will it apply in the event of damage or accident resulting from
negligence, lack of care or maintenance, or if the heater has been modified in any way.
Thermofilm Australia Pty Ltd reserve the right to reject any Warranty claim deemed to be false.
Retailers must have Warranty claims authorised by Thermofilm Australia. Ph 03 9562 3455
* Conditions apply. Please refer the Thermofilm standard terms of sale and warranty for details.
