Netted Tree Glider
Step 1
Find a support structure such as the ones mentioned in the “Before
Assembly” section on the first page. Make sure the support structure is at
least 60” above the ground.
Step 2
Wrap each strap around the support structure. Distance each strap the width of
the Tree Glider Rope Loops when perpendicular to the ground (~40”). Thread
the heavy-duty carabiner clip strap end through the other end loop to secure
straps. Attach the Tree Glider Rope Loops to each heavy-duty carabiner clip.
Adjusting Height:
Remove the Tree Glider Rope Loops from the heavy-duty
carabiner clips. Wrap the straps around the support structure until the Tree
Glider is at least 2 feet off the ground.
HANGING KIT INSTRUCTIONS
support structure
Height is at least 60”
above the ground.
At least 37”
circumference.
~40” Apart
Tree Glider
Rope Loops
