Installation Guide
Roller Blinds
Fitting the blind
Locate the pin-end (the
opposite end to the controls) of
the blind into the central hole in
the corresponding bracket.
Lift the control end of the blind
and slot the rectangular ‘lugs’
into the corresponding slots on
the bracket.
Child Safety
Cord Tensioner
The cord retaining device must be installed at the maximum distance possible
from the control mechanism to prevent looped cords from becoming slack.
Place the retaining device on the wall and mark the position of the screw hole(s)
with a pencil.
Attach the retaining device to the wall using the fixings provided.
Young
children
can be
strangled
by loops
in pull cords,
chains, tapes and inner
cords that operate the
product.
To avoid strangulation and
entanglement, keep cords
out of the reach of young
children. Cords may become
wrapped around a child’s
neck.
Move beds, cots and
furniture away from window
covering cords.
Do not tie cords together.
Make sure cords do not twist
and create a loop.
Minimum 150cm
For safety reasons, always
ensure that the top of the
blind is installed at least
150cm (1500mm) from the
floor.
