9
Step 3:
Put the chair back on top of chair base. (Figure 7)
Make sure the metal bracket slips into the metal bracket of the chair base. (Figure 8)
Press the metal brackets until you can hear the “click” sound when the metal bracket is installed
properly. (Figure 9)
(Figure 7) (Figure 8) (Figure 9)
Step 4:
Find the motor wire under the chair base. (Figure 10)
Connect the adaptor with the motor wiring and then connect the plug wiring with the adaptor.
(Figure 11 & 12)
Take the hand control out from the side pocket of the seat. (Figure 13)
The assembly is finished, and you can start to use the lift chair.
(Figure 10) (Figure 13)
(Figure 11) (Figure 12)
Once the chair is assembled as per Assembly Instruction, place the chair on a flat surface in a dry
room. The chair is now ready for use.
